Hardware Features - EMC VNX Series Hardware Information Manual

Hide thumbs Also See for VNX Series:
Table of Contents

Advertisement

Hardware features

Table 2 Block and File VNX8000 platform hardware feature quick reference
Minimum
Maximum
form
# of
Drive
factor
drives
types
4U w/out
1,500
6-Gb/s
optional
2.5 or
CS, DME,
3.5 in.
SPSs,
SAS
and DAEs
and
2.5 or
3.5 in.
Flash
1. For the type and number of Ultraflex I/O modules supported in the SP, refer to the I/O module section on
2. For the type and number of Ultraflex I/O modules supported in the DM, refer to the I/O module section on
3. pNFS = parallel-NFS
Contained in a 14U architecture, the File/Unified VNX8000 platform weighs approximately
284.2 lb (626.5 kg) fully loaded without I/O modules and DAEs. With the 4U SPE having
the deepest dimension within the cabinet, the File/Unified VNX8000 without DAEs
measures (14U) 27 inches high x 17.6 inches wide x 31 inches deep (68.58 cm x 44.7 cm
x 78.74 cm). Between the front and rear of the enclosure, a midplane distributes power
and signals to all the enclosure components. On the front of the VNX8000 SPE, the power
supplies, cooling fan modules, and disk drives plug directly into the midplane
connections. On the rear of the VNX8000 SPE, power supply connector modules,
management modules, and I/O modules plug directly into the midplane connections.
Note: The previously mentioned dimensions are approximate and do not include any I/O
modules, DAEs, or the cabinet enclosure.
For more information about the weight and dimensions of a VNX8000 platform, go to
https://mydocs.emc.com/VNX/
technical specifications. Next, follow the steps in the wizard.
Block
Config.
I/O
Built-in
slots
I/O ports
per SP
per SP
SPs
1
11
None
2
Configured for AC-input power, the Block VNX8000 includes the following hardware
features:
Two 2U dual SPSs (one for the SPE and one for the Vault DAE):
• On the front, the 2U dual SPS has two SPSs (SPS A on the left and SPS B on the
right).
Each SPS consists of:
– A removable battery installed in an SPS tray within the 2U dual SPS enclosure;
each battery has one power on LED (green)
and go to the About VNX section, and then select View
System
Config.
memory
I/O slots
per SP
Protocols
per DM
128 GB
FC, iSCSI,
and FCoE
EMC VNX8000 Hardware Information Guide
VNX8000 product description
File
System
memory
DMs
per DM
2
5
2 to 8
24 GB
page
47.
page
63.
Protocols
NFS,
CIFS,
and
3
pNFS
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vnx8000

Table of Contents