EMC VNX Series Hardware Information Manual page 100

Hide thumbs Also See for VNX Series:
Table of Contents

Advertisement

Disk-array enclosures
100
EMC VNX8000 Hardware Information Guide
LCC input/output ports, connectors, and LEDs
The 3U, 120 (2.5-inch) DAE LCC supports the following I/O ports on the rear:
Four 6-Gb/s PCI Gen 2 mini-SAS ports
One management (RJ-12) connector (not used in the VNX7600 platform)
One USB connector
6-Gb/s mini-SAS x4 ports — The LCC supports four (two input with a double circle
two output with a double diamond
or 0) on the rear of each LCC (A and B) as shown in
interface for SAS and NL-SAS drives in the DAE. The port is a 26-circuit SAS small
form-factor 8088 (SFF-8088) specification (socket or receptacle) using an SFF-8088
specification mini-SAS 26-circuit cable (plug) with a pull tab.
Mini-SAS connector LED — A blue/green link/activity LED next to the mini-SAS port
indicates the DAE connection status. Blue indicates that the port is established at a
maximum bus speed of 6-Gb/s. Green indicates that a wide port width other than 4x is
established or one or more lanes is not operating at the maximum bus speed.
Mini-SAS connector
LED (bi-color, blue/green)
Mini-SAS connectors
(output or expansion)
Figure 81 6-Gb/s mini-SAS input and output connectors and LEDS
Note: As described in the previous paragraphs, the first connection from the DAE comes
from the four, 6-Gb/s mini-SAS ports. This connection uses a a 26-pin mini-SAS small
form-factor 8088 (SFF-8088) specification connector (plug) with a pull (release) tab on one
end of the cable, while the SPE side (SAS I/O module) uses a 36-pin mini-SAS HD small
form-factor 8644 (SFF-8644) specification connector (plug) with a pull (release) tab (see
Figure 49 on page
62) on the other end of the cable.
A video describing how to properly connect mini-SAS HD cables and mini-SAS cables from
a DPE to a DAE, respectively in a VNX product is available online at:
https://edutube.emc.com/, in the Search box, type in Mini-SAS HD Cable Connectivity.
The video will start immediately.
) 6-Gb/s mini-SAS x4 ports (labeled 6 Gb SAS x4 1
6 Gb
X4
X4
SAS
1
0
1
1
0
0
Figure
81. This port provides an
6 Gb
X4
X4
SAS
1
0
Mini-SAS connectors
(input or primary)
and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vnx8000

Table of Contents