EMC VNX Series Hardware Information Manual page 41

Note: The pin designations shown in
Table 16 lists the 1U Control Station Ethernet (DB-9) pin signals used on the connector.
Table 16 Control Station (DB-9) plug connector pinout
DB-9 Pin Signal
1 CD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Control Station modem (DB-9) plug connector
The back of the File/Unified VNX8000 platform 1U Control Station includes a standard
modem serial interface (DB-9) plug connector (labeled with a telephone handset icon and
the numbers 1 0 1 0 on the left). Notice the orientation of the pins
1 0 1 0
Pin 1 5
6
9
VNX-000527
Figure 28 Control Station modem (DB-9) plug connector
Note: The pin designations shown in
Table 17 lists the 1U Control Station Ethernet (DB-9) pin signals used on the connector.
Table 17 Control Station modem (DB-9) plug connector pinout
DB-9 Pin Signal
1 CD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
Figure 27 on page 40
Description
Carrier detect
Received data
Transmitted data
Data terminal ready
Ground
Data set ready
Request to send
Clear to send
Ring indicator (not used)
Figure 28 are for reference only.
Description
Carrier detect
Received data
Transmitted data
Data terminal ready
Ground
Data set ready
EMC VNX8000 Hardware Information Guide
System component description
are for reference only.
(Figure 28).
41