EMC VNX Series Hardware Information Manual page 166

Eight- and sixteen-bus DAE cabling
B BE11
B BE10
B BE9
B BE8
166 EMC VNX8000 Hardware Information Guide
As described in Table 58 on page
VNX8000 is shown in Figure 133 on page 166
show the 6-Gb/s SAS IO module slot location, the port location in the I/O module, and the
cable labels from the I/o module side to the LCC side on the respective DAE.
"Slot 4 (sixteen-bus) upgraded configuration" on page 166
◆
"Slot 6 (sixteen-bus) upgraded configuration" on page 167
◆
Slot 4 (sixteen-bus) upgraded configuration
The following figure shows the location of the 6-Gb/s SAS I/O module slot (slot 4), the I/O
module port location (0, 1, 2, and 3), and the cable labels for both the I/O module side
and the corresponding LCC side in the DAE it connects to
information, refer to Table 57 on page
B BE11
B BE10
B BE9
B BE8
Figure 133 Example continuation of a sixteen-bus upgrade configuration of a
6-Gb/s SAS I/O module in slot 4
165, the resulting numbering scheme for the upgraded
and Figure 134 on page
(Figure
162.
A BE11
A BE10
A BE9
A BE8
B
A
167. These figures
133). For more
A BE11
A BE10
A BE9
A BE8
VNX-000831
VNX8000
with the