Overview; Related Features And Functionality Information - EMC Unity Family Security Configuration Manual

Introduction

Overview

Related features and functionality information

EMC Unity All Flash, EMC Unity Hybrid, EMC UnityVSA 4.0 Security Configuration Guide
8
The storage system uses a variety of security features to control user and network
access, monitor system access and use, and support the transmission of storage data.
This document describes available security features.
This document is intended for administrators responsible for storage system
configuration and operation.
The guide approaches security settings within the categories shown in
page 8:
Table 1 Security settings categories
Security category
Access control
Logs
Communication
security
Data security
Serviceability
Alert system
Other security settings
Specific information related to the features and functionality described in this
document is included in the following for Unity:
Unisphere Command Line Interface User Guide
l
Unisphere Online Help
l
SMI-S Provider Programmer's Guide
l
Service Commands Technical Notes
l
Secure Remote Services Requirements and Configuration
l
The complete set of EMC customer publications is available on the EMC Online
Support website at http://Support.EMC.com. After logging in to the website, click
the Support by Product page, to locate information for the specific feature required.
Description
Limiting access by end-user or by other entities to protect
hardware, software, or specific product features.
Managing the logging of events.
Securing product network communications.
Providing protection for product data.
Maintaining control of product service operations performed by the
manufacturer or its service partners.
Managing the alerts and notifications generated for security-related
events.
Security settings that do not fall in one of the previous sections,
such as physical security.
Table 1 on