EMC VNX Series Hardware Information Manual page 42

System component description
Data Mover enclosure rear view
42 EMC VNX8000 Hardware Information Guide
Table 17 Control Station modem (DB-9) plug connector pinout
DB-9 Pin Signal
7 RTS
8 CTS
9 RI
The rear of the File/Unified VNX8000 platform Data Mover enclosure (DME) does not
contain any LEDs (Figure
modules have LEDs.
Note: Figure 29 is a graphical representation of the rear view of a File/Unified VNX8000
platform with a DME having two Data Movers (each Data Mover shows one management
module, one four-port 8-Gb/s FC I/O module, and four filler panel modules).
1 Data Mover enclosure
2 Filler panel module
Figure 29 Example of a DME (rear view)
Data Mover management module
The Data Mover management module provides the management connections via three
10/100/1000 Ethernet (RJ-45) ports. The Data Mover management module also includes
one RS-232 (EIA) DB-9 serial socket connector for service laptop connection and several
LEDs (Figure 30 on page
Description
Request to send
Clear to send
Ring indicator (not used)
29). Only the Data Mover management module and the I/O
4
3
4
43).
3
Four-port 8-Gb/s FC I/O module
Data Mover management module
1
2
VNX-000600