EMC VNX Series Hardware Information Manual page 44

System component description
44 EMC VNX8000 Hardware Information Guide
Data Mover management module LEDs
Figure 31 shows the LEDs and
Power/Fault LED
Port 2 (Activity LED)
2
Port 2 (Link LED)
0
Port 0 (Link LED)
Port 0 (Activity LED)
Figure 31 Data Mover management module LEDs
Table 18 Data Mover management module LEDs
LED Color
Power/Fault Green
Amber
—
Link (each Green
port has one)
—
Activity (each Amber
port has one)
—
Numeric —
(7-segment)
display for
enclosure ID
Data Mover management module serial console (DB-9) socket connector
The back of the File/Unified VNX8000 platform Data Mover management module includes
a standard serial console Electronics Industries Association (EIA) RS-232 interface (DB-9)
socket connector (labeled with a wrench tool icon on the left). Notice the orientation of
the pins (Figure 32 on page
Table 18 on page 44
Port 1 (Activity LED)
1
Port 1 (Link LED)
Numeric display
(blade enclosure ID)
#
CNS-001671
State Description
On Data Mover management module is powered up.
On Data Mover management module has faulted.
Note: LED is always illuminated at powerup, until it is
initialized.
Off Data Mover management module is powered down.
On Network connection
Off No network connection
Blinking Transmit/receive activity
Off No network activity
On Displays the enclosure ID assigned to the Data Mover
enclosure.
Note: Each enclosure is assigned a number at installation.
45).
describes them.