EMC VNX Series Hardware Information Manual page 24

System component description
Data Mover enclosure front view
24 EMC VNX8000 Hardware Information Guide
The front of the File/Unified VNX8000 platform 2U Data Mover enclosure (DME) contains
two enclosure status LEDs (power and fault), as shown in
Note: Figure 10 is a graphical representation of the File/Unified VNX8000 platform 2U
Data Mover enclosure with four power supply/cooling (fan) modules and two CPU
modules installed.
Data Mover enclosure
AC
Figure 10 Data Mover enclosure status LEDs
Table 6 describes the 2U Data Mover enclosure status (power and fault) LEDs.
Table 6 DME status LEDs
LED Color State
Power Blue On
— Off
Fault Amber On
— Off
Data Mover enclosure
fault LED
AC
Description
Data Mover enclosure is powered up, operating normally
Data Mover enclosure is powered down.
A replaceable component failed within the enclosure.
Note: When the enclosure fault LED is amber, look for the
replaceable component within the enclosure that is causing
the fault. Refer to the other status LED definitions in this
section to determine which replaceable component failed.
Data Mover enclosure operating normally.
Figure 10.
power LED
AC AC
CNS-001667