EMC VNX Series Hardware Information Manual page 155

Table 56 A (sixteen-bus) VNX8000 scenario
I/O module slot
number Port
10 1
10 2
10 3
As described in Table 56, the resulting numbering scheme for a sixteen-bus VNX8000
shipped from the factory is shown in
page 159. These figures show the 6-Gb/s SAS I/O module slot location, port location in
the I/O module, and the cable with cable labels from the I/O module side to the LCC side
on the respective DAE.
"Slot 4 (sixteen-bus) configuration" on page 156
◆
"Slot 5 (sixteen-bus) configuration" on page 157
◆
"Slot 6 (sixteen-bus) configuration" on page 158
◆
"Slot 10 (sixteen-bus) configuration" on page 159
◆
The next two illustrations show examples of how the 2U, 25 DAEs are deployed in two 40U
racks of a Block interleaved and a Block stacked sixteen-bus system.
"Sixteen-bus factory-shipped Block interleaved configuration" on page 160
◆
"Sixteen-bus factory-shipped Block stacked configuration" on page 161
◆
Back-end SP A an B cable labels
loop # (white w/black text)
13 SP A SAS 10 Port 1
SP B SAS 10 Port 1
14 SP A SAS 10 Port 2
SP B SAS 10 Port 2
15 SP A SAS 10 Port 3
SP B SAS 10 Port 3
Figure 125 on page 156
EMC VNX8000 Hardware Information Guide
Eight- and sixteen-bus DAE cabling
Back-end loop cable
label colors
Dark gray/green
Light gray
Peach
through Figure 128 on
155