EMC VNX Series Hardware Information Manual page 69

Two-port 10-Gb/s optical I/O module
The two-port 10-Gb/s optical or active and passive Twinax I/O module (labeled 10 GbE v3
on the latch handle) comes with two optical ports, one power/fault LED, and a link and
activity LED for each port
speeds of 10-Gb/s networks. The two-port 10-Gb/s optical I/O module uses the SFP+
transceiver module. For part number label location, see the
Guide
available online at
documentation, and select the related documentation software for the model desired,
then go to VNX Hardware Parts, next select the VNX8000 Parts Guide.
1 2
CNS-001756
1 Push button latch handle
2 Power/fault LED
Figure 55 Two-port 10-Gb/s optical I/O module
Note: The 10-Gb/s optical I/O module uses a specific type of SFP module, ensure you are
using the correct one. Refer to the Parts Location guide for more information.
(Figure 55). The optical ports on this I/O module can interface at
https://mydocs.emc.com/VNX/
3
4
5
3
4
EMC VNX8000 Hardware Information Guide
VNX8000 Parts Location
and go to Additional VNX
Link LED (right)
Activity LED (left)
I/O modules
69