EMC VNX Series Hardware Information Manual page 39

Control Station Ethernet (RJ-45) port and connector (adapter)
Figure 24 shows an example of the Ethernet RJ-45 port and cable connector.
8 7 6 5 4 3 2 1
Figure 24 Control Station Ethernet (RJ-45) port and connector (adapter)
Table 14 lists the Control Station Ethernet (RJ-45) pin signals used on the connector.
Table 14 Control Station Ethernet (RJ-45) port and connector pinout
RJ-45 pin Signal
1 BI_DA+
2 BI_DA-
3 BI_DB+
4 BI_DC+
5 BI_DC-
6 BI_DB-
7 BI_DD+
8 BI_DD-
Control Station Ethernet (RJ-45) port LEDs
The Control Station (RJ-45) has two LEDs—a green LED to the left of the connector and a
bi-color (green/amber) LED to the right of the connector—that indicates the link/activity
and speed of the 1U Control Station (RJ-45) ports, respectively
1 2
CNS-001748
Figure 25 Control Station Ethernet (RJ-45) port LEDs
CNS-001749
Description
Bidirectional pair A, +
Bidirectional pair A, -
Bidirectional pair B, +
Bidirectional pair C, +
Bidirectional pair C, -
Bidirectional pair B, -
Bidirectional pair D, +
Bidirectional pair D, -
EMC VNX8000 Hardware Information Guide
System component description
(Figure 25).
39