EMC VNX Series Hardware Information Manual page 91

6-Gb/s mini-SAS port LEDs and port direction (input or output)
Figure 71 shows the LCC 6-Gb/s SAS port LED—a bi-color (blue/green) LED next to the
connector, either left or right—that indicates the link/activity of the SAS port.
also shows a double circle (or dot) symbol
(for output).
3U, DAE LCC B 6-Gb/s SAS ports
3U, DAE LCC A 6-Gb/s SAS ports
Figure 71 6-Gb/s mini-SAS port LED
Table 38 describes the 3U DAE LCC 6-Gb/s mini-SAS port LEDs.
Table 38 6-Gb/s mini-SAS port LEDs
LED Color
Link/activity Blue
Green
Alternating
Blue/Green
—
Management (RJ-12) connector
Figure 72 on page 92 shows the management port connector (labeled with two symbols;
one depicting a telephone handset with a line through it and the other depicting a
battery). The telephone handset with a line through it symbol means that you cannot
connect telephone type circuits to this connector (see the WARNING on
connects the LCC (A and B) ports to the SPS (A and B) ports, respectively.
(for input) or a double diamond symbol
VNX-000101
State Description
On All lanes are running at 6 GB/s
On One or more lanes is not running at full speed or
disconnected
Blinking Port is being marked by the host
Off Not connected
EMC VNX8000 Hardware Information Guide
Disk-array enclosures
Figure 71
page 92). This port
91