EMC VNX Series Hardware Information Manual page 117

Table 49 6-Gb/s mini-SAS port connector pinout (continued)
Pin Signal
A11 Rx 3+
A12 Rx 3-
A13 GND
6-Gb/s mini-SAS port LEDs and port direction (input or output) —
6-Gb/s mini-SAS port LED—a bi-color (blue/green) LED next to the connector, either left or
right—that indicates the link/activity of the SAS port.
Figure 98 Example of an ICM 6-Gb/s mini-SAS connectors and LEDs
Table 50 describes the 4U, 60 (2.5- or 3.5-inch) DAE ICM 6-Gb/s mini-SAS port LEDs.
Table 50 6-Gb/s mini-SAS port LEDs
LED Color
Link/activity Blue
Green
—
Pin
B11
B12
B13
LED (bi-color);
0
blue/green
6 Gb/s SAS
input
LED (bi-color);
blue/green
1
6 Gb
SAS
0
LED (bi-color);
blue/green
6 Gb/s SAS
LED (bi-color);
blue/green
1
VNX-000655
State Description
On Indicates a 4x or 8x connection with all lanes
running at 6 Gb/s
On Indicates that a wide port width other than 4x or 8x
has been established or one or more lanes is not
running at full speed or disconnected
Off Not connected
EMC VNX8000 Hardware Information Guide
Disk-array enclosures
Signal
Tx 3+
Tx 3-
GND
Figure 98 shows the
output
117