EMC VNX Series Hardware Information Manual page 26

System component description
VNX8000 rear view
SPS rear view
26 EMC VNX8000 Hardware Information Guide
Power supply/cooling (fan) module LED
The power supply/cooling (fan) modules have status LED on the front.
the LEDs for the power supply/cooling (fan) modules.
Power supply/
cooling (fan) power/fault LED
AC
Figure 12 Power supply/cooling (fan) module LED
Table 8 describes the power supply/cooling (fan) LED.
Table 8 Power supply/cooling (fan) module LED
LED Color State
Power/Fault Green On
Amber Blinking
Amber On
As previously described, a Block VNX8000 platform is made up of a 4U SPE while the
File/Unified VNX8000 platform is made up of a 4U SPE, two 1U Control Stations (one
optional), two SPSs, and two to four 2U DMEs. The following sections will describe the
rear view of the VNX8000 platform components as previously shown in
page 8.
In the VNX8000 platform, a 2.2-kilowatt Lithium-ion 2U dual standby power supply (SPS)
is used to maintain power to the VNX8000 platform SPE and the Vault DAE during a power
loss.
Figure 13 on page 27 shows an example of the rear view of a 2U dual SPS.
AC
Description
Normal (no faults detected)
Power supplied but external fault detected
No power
Figure 12 shows
AC AC
CNS-001673
Figure 2 on