D.2 European Standards - YASKAWA U1000 Series Technical Manual

D.2 European Standards

D.2 European Standards
Figure D.1
The CE mark indicates that a product is in compliance with applicable European Directives for safety and environmental
regulations. It is required for engaging in business and commerce in Europe.
The applicable European Directives for this product are as follows. We declared the CE marking based on the
harmonized standards in the following table.
Applicable European Directive
Low Voltage Directive (2006/95/EC)
EMC Guidelines (2004/108/EC)
Machinery Directive (2006/42/EC)
The user(s) is solely responsible for ensuring that the end products used with this drive comply with all applicable
European directives and with other national regulations (if required).
 CE Low Voltage Directive Compliance
This drive has been tested according to European standard IEC/EN 61800-5-1, and it fully complies with the Low
Voltage Directive.
To comply with the Low Voltage Directive, be sure to meet the following conditions when combining this drive with
other devices:
Area of Use

Do not use drives in areas with pollution higher than severity 2 and overvoltage category 3 in accordance with
IEC/EN 664.
Grounding

The drive is designed to be used in T-N (grounded neutral point) networks. If installing the drive in other types of
grounded systems, contact your Yaskawa representative for instructions.
page 86 for details.
Guarding Against Harmful Materials

When installing IP00 enclosure drives, use an enclosure that prevents foreign material from entering the drive from
above or below.
518
YEC_common
Figure D.1 CE Mark
IEC/EN618995-1: 2007
IEC/EN 61800-3: 2004
ISO/EN ISO 13849-1/AC: 2009
IEC/EN 62061: 2005 (SILCL3)
IEC/EN 61800-5-2: 2007 (SIL3)
Refer to Enable the Internal EMC Filter on
YASKAWA ELECTRIC SIEP C710636 03A YASKAWA U1000 Technical Manual
Applicable Harmonized Standards