Log In With The Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Commissioning

6.4 Log in with the connectivity module

6.4 Log in with the connectivity module
After a connection has been established from the "SIDRIVE IQ Config" application to the
connectivity module, a window is displayed where you can enter the login data for the
connectivity module. If you do not login, then you will only be able to select a limited number of
functions.
Menus and functions without logging in
You do not need to login to the connectivity module for all menus and functions. You can view
or use the following menus and functions without logging in:
● "Login" menu
● "SIMOTICS CONNECT" menu
Functions "Identification" and "Reset user credentials" can be selected.
● "Settings" menu:
You are automatically routed to the "System settings" submenu. You can view the settings
- however, you cannot change them.
Factory settings for logging in
The factory settings for logging in are as follows:
● User name: "admin"
● Password: Comprising the last 6 digits of the serial number on the rating plate of the
connectivity module.
Caution: Not the serial number of the motor!
After logging in for the first time, change the user name and the password of the "SIDRIVE IQ
Config" application in menu "Settings > User".
30
SIMOTICS CONNECT 400
Operating Instructions, 05/2020, A5E50161952A AA