Table of Contents
Advertisement
Figure 68. Installing the expansion riser 2A
Figure 69. Installing the expansion riser 2B
Next steps
Follow the procedure listed in
Install any device drivers required for the card as described in the documentation for the card.
Removing expansion card from the expansion card riser
Prerequisites
Follow the safety guidelines listed in
Follow the procedure listed in
If applicable,
remove the air
If applicable, disconnect the cables from the expansion card.
When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed.
118
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
shroud.
system.
Advertisement
Table of Contents
