Table of Contents
Advertisement
Item
Ports, panels, and slots Icon
2
Drive slots
3
VGA port
4
Right control panel
5
Information tag
Left control panel view
Figure 5. Left control panel with optional iDRAC Quick Sync 2.0 indicator
Table 4. Left control panel
Item
Indicator or button
1
Status LED indicators
2
System health and system
ID indicator
3
iDRAC Quick Sync 2
wireless indicator (optional)
NOTE:
iDRAC Quick
Sync 2 wireless
indicator is available
Description
•
•
N/A
Enable you to install drives that are supported on your system. For
more information about drives, see the Technical specifications
section.
Enables you to connect a display device to the system. For more
information, see the
N/A
Contains the power button, USB port, iDRAC Direct micro port, and
the iDRAC Direct status LED.
N/A
The Information Tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If you
have opted for the secure default access to iDRAC, the Information
tag also contains the iDRAC secure default password.
Icon
N/A
Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see the
Status LED indicators
Quick Sync 2 (wireless): Indicates a Quick Sync enabled system.
The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices. This feature
aggregates hardware or firmware inventory and various system
level diagnostic and error information that can be used in
troubleshooting the system. For more information, see the
Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
Technical specifications
Description
Indicate the status of the system. For more information, see the
Status LED indicators
section.
Indicates the system health. For more information, see the
health and system ID indicator codes
Indicates if the iDRAC Quick Sync 2 wireless option is activated. The
Quick Sync 2 feature allows management of the system using mobile
devices. This feature aggregates hardware/firmware inventory and
various system level diagnostic/error information that can be used in
troubleshooting the system. You can access system inventory, Dell
Dell EMC PowerEdge R640 overview
section.
section.
System
section.
13
Advertisement
Table of Contents
