Table of Contents
Advertisement
Figure 39. Removing the system cover
Installing the system cover
Prerequisites
Follow the safety guidelines listed in
Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
The system cover slides forward, the tabs on the system cover engage with the guide slots on the system and the system cover latch
locks into place.
Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock clockwise to the locked position.
84
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
