Figure 106. Installing the SAS expander card
Next steps
Connect the SAS cables to the SAS expander card.
Install the backplane
cover.
Install the cooling fan assembly.
Install the cooling
shroud.
Follow the procedure listed in
Rear drive cage
Removing the rear drive cage
Prerequisites
Follow the safety guidelines listed in
Follow the procedure listed in
Remove all the drives.
Disconnect all the cables from the rear drive backplane.
Steps
Using Phillips #2 screwdriver, loosen the screws that secure the drive cage to the system.
Pull and hold the screws to lift the drive cage away from the system.
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
145