Dell EMC PowerEdge R640 Installation And Service Manual page 69

Table of Contents

Advertisement

Option
Description
PXE Device n
Enables you to control the configuration of the PXE device.
Settings(n = 1 to
4)
UEFI HTTP
Options
Settings
HTTP Device (n =
1 to 4)
HTTP Device n
Enables you to control the configuration of the HTTP device.
Settings (n = 1 to
4)
UEFI iSCSI
Enables you to control the configuration of the iSCSI device.
Settings
Table 46. UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
Steps
Power on, or restart your system.
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
On the System Setup Main Menu screen, click System BIOS.
On the System BIOS screen, click Integrated Devices.
Integrated Devices details
About this task
The Integrated Devices screen details are explained as follows:
Option
Description
User Accessible
Configures the user accessible USB ports. Selecting Only Back Ports On disables the front USB ports; selecting
USB Ports
All Ports Off disables all front and back USB ports; selecting All Ports Off (Dynamic) disables all front and
back USB ports during POST and front ports can be enabled or disabled dynamically by an authorized user or
authorized users without resetting the system.
Description
Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the
device.
Description
Specifies the name of the iSCSI initiator in IQN format.
Enables or disables the iSCSI device. When disabled, a
UEFI boot option is created for the iSCSI device
automatically. This is set to Disabled by default.
Enables you to control the configuration of the iSCSI
device.
Pre-operating system management applications
69

Advertisement

Table of Contents
loading

Table of Contents