Table of Contents
Advertisement
Figure 45. Inside the system - 3 PCIe expansion risers
1. right control panel cable cover
3. backplane cover
5. cabling latch
7. air shroud
9. processor 2 slot
11. expansion riser 2 A
13. expansion riser 1 A
15. integrated storage controller card
17. intrusion switch
19. hard drive backplane
Air shroud
Removing the air shroud
Prerequisites
CAUTION:
Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
Follow the safety guidelines listed in
Follow the procedure listed in
Steps
Hold the air shroud at both ends and lift it away from the system.
Safety
instructions.
Before working inside your
system.
2. hard drive cage
4. backplane release latch
6. cooling fan (8)
8. processor and DIMM blank
10. IDSDM/vFlash module slot
12. network daughter card
14. PCIe shroud
16. processor 1
18. cabling latch
20. left control panel cable cover
Installing and removing system components
89
Advertisement
Table of Contents
