Table of Contents
Advertisement
Figure 105. Removing the SAS expander card
Next steps
Install the SAS expander
card.
Installing the SAS expander card
Prerequisites
Follow the safety guidelines listed in
Steps
Align the slots on the SAS expander card with the standoffs on the expander card tray.
Slide the SAS expansion card until the connectors on the SAS expander card engage with the SAS connectors on the backplane.
Using Philips #2 screwdriver, tighten the screws to secure the SAS expander card to the expander card tray.
144
Installing and removing system components
Safety
instructions.
Advertisement
Table of Contents
