Installation Orientation And Clearance - YASKAWA CIMR-ACA4011 Instruction Manual

Installation Orientation and Clearance

Install the MxC vertically so as not to reduce the cooling effect. When installing the MxC, always provide
the following installation space to allow normal heat dissipation.
IMPORTANT
-10
1
50 mm min.
30
mm
min.
50 mm min.
Horizontal Space
Fig 1.8 MxC Installation Orientation and Clearance
1. The same space is required horizontally and vertically for both Open Chassis (IP00) and Enclosed Wall-
mounted [IP20, NEMA 1 (Type 1)] designs.
2. Always provide enough space for suspension eye bolts and the main circuit lines when installing a MxC in
a panel.
120 mm min.
50 mm min.
30
mm
min.
50 mm min.
120 mm min.
Vertical Space
Air
Air