YASKAWA CIMR-ACA4011 Instruction Manual page 149

o2: Multi-function Selections
Name
Parameter
Number
Display
Local/Remote
Determines if the digital operator
Key Function
LOCAL/REMOTE key is functional.
Selection
o2-01
0: Disabled.
Local/Remote
1: Enabled.
Key
STOP Key Func- Determines if the STOP key on the digital
tion Selection operator will stop the MxC when MxC is
operating from external terminals or
o2-02
serial communication.
Oper STOP Key
0: Disabled.
1: Enabled.
User Parameter Allows storing of parameter settings as a
Default Value User Initialization Selection.
0: No Change
1: Set Defaults - Saves current parame-
o2-03
User Defaults
2: Clear All - Clears the currently saved
MxC/kVA Selec-
This parameter only needs to be set when
tion
o2-04 installing a new control board. Do not
change for any other reason.
MxC Model #
Frequency Refer- Determines if the DATA/ENTER key
ence Setting must be used to input a frequency refer-
Method Selection ence from the digital operator.
0: Disabled. - DATA/ENTER key must
o2-05
1: Enabled. - DATA/ENTER key is not
Operator M.O.P.
Operation Selec- Determines if the MxC will stop when the
tion when Digital digital operator is removed when in Local
Operator is Dis- Mode or b1-02 = 0.
connected 0: Disabled. - The MxC will not stop
o2-06
1: Enabled. - The MxC will fault (OPR)
Oper Detection
Cumulative Oper-
ation Time Setting Sets the initial value of the elapsed opera-
o2-07
tion timer U1-13.
Elapsed Time Set
Cumulative Oper- Sets how time is accumulated for the
ation Time Selec- elapsed operation timer U1-13.
tion 0: Power-On Time. Time accumulates
o2-08
1: Running Time. Time accumulates
Elapsed Time Run
Description
ter settings as user initialization. A1-
03 now allows selecting <1110> for
user initialization and returns o2-03 to
zero.
user initialization. A1-03 no longer
allows selecting <1110> and returns
o2-03 to zero.
be pressed to enter a frequency refer-
ence.
required. The frequency reference is
adjusted by the up and down arrow
keys on the digital operator without
having to press the DATA/ENTER
key.
when the digital operator is removed.
and coast to stop when the digital
operator is removed.
when the MxC is powered.
only when the MxC is running.
Control
Methods
Change
Setting
Default during
Open
Range
Run
V/f Loop
Vector
0 or 1 1 No A
0 or 1 1 No A
0 to 2 0 No A
*1
0 to FF No A
5
0 or 1 0 No A
0 or 1 0 No A
0 to
0 hr No A
65535
0 or 1 0 No A
Parameter Tables
MEMO-
BUS Page
Flux
Register
Vector
A A 505H 6-125
A A 506H 6-125
4-13
A A 507H
6-126
A A 508H -
A A 509H 6-126
A A 50AH -
A A 50BH 6-126
A A 50CH -
53
5-