Electrical Installation - YASKAWA PG-F3 Installation Manual

4

Electrical Installation

◆
Safety Messages
Power to the drive must be shut off when installing this option card.
Even though the power has been shut off, voltage still remains in the drive's DC bus. Wait
before removing the front cover once the drive has been turned off.
The CHARGE light on the drive will go out after voltage in the DC bus drops below 50 V,
at which point it is safe to remove the front cover.
Due to the risk of electric shock, be sure that all LEDs have gone out and that the DC bus
voltage has reached a safe level prior to performing any work on the drive.
Do not allow unqualified personnel to perform work on the drive.
Failure to comply could result in death or serious injury.
Maintenance, inspection, and replacement of parts must be performed only by authorized
personnel familiar with installation, adjustment and maintenance of AC drives and Option
Cards.
YASKAWA ELECTRIC TOBP C730600 51A YASKAWA AC Drive-Option Card PG-F3 Installation Manual
DANGER
Electric Shock Hazard
W ARNING
Electrical Shock Hazard
4 Electrical Installation
9