YASKAWA CIMR-ACA4011 Instruction Manual page 206

Name
Parameter
Number
Display
Speed Agreement
Detection Width
(+/-)
L4-04
Spd Agree Wdth
+-
Parameters and Output Signals
Parameter
Number
L4-01
L4-02
L4-03
L4-04
Set the corresponding setting in the multi-function output (H2-01 to H2-05) to output the desired Fref/Fout
Agree signal, Fref/Set Agree signal, or Frequency Detection signal.
Function
Fref/Fout Agree 1
Fref/Set Agree 1
Frequency Detection 1
Frequency Detection 2
Fref/Fout Agree 2
Fref/Set Agree 2
Frequency Detection 3
Frequency Detection 4
Description
Effective when "Frequency (speed) agree 2,"
"Frequency (FOUT) detection 3," or "Fre-
quency detection 4" is set for a multi-function
output.
Frequency detection width is set in Hz units.
Name
Speed Agree Detection Level
Speed Agree Detection Width
Speed Agree Detection Level (+/-)
Speed Agree Detection Width (+/-)
Setting
2
3
4
5
13
14
15
16
Machine Protection
Control Methods
Change
Setting
Default during
Range
V/f
Run
0.0 to
2.0 Hz No A
20.0
Function
Fref/Set Agree 1
Frequency Detection 1
Frequency Detection 2
Fref/Fout Agree 1
Fref/Set Agree 1
Frequency Detection 1
Frequency Detection 2
Fref/Set Agree 2
Frequency Detection 3
Frequency Detection 4
Fref/Fout Agree 2
Fref/Set Agree 2
Frequency Detection 3
Frequency Detection 4
Open
Flux
Loop
Vector
Vector
A A
45
6-