Option Package Components; Installation Tools - YASKAWA MECHATROLINK-III Installation Manual

• Confirm that the model number on the option nameplate and the model listed in the
purchase order are the same. Refer to
• Contact the distributor where the option was purchased or contact Yaskawa or a
Yaskawa representative about any problems with the option.
◆

Option Package Components

Descrip
Option
tion:
-
Quantity: 1
*1 GA700, GA800, CR700, and CH700 drives do not use the ground wire.
*2 GA700, GA800, CR700, and CH700 drives use two screws only.
◆

Installation Tools

• A Phillips screwdriver or slotted screwdriver (blade depth: 0.4 mm (0.02 in), width: 2.5
mm (0.1 in)) .
*1
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
*1 Phillips screw sizes are different for different drive capacities.
YASKAWA TOEP C730600 88A MECHATROLINK-III Installation Manual
Figure 4.1
Table 3.1 Option Package Contents
Ground Wire
Screws (M3)
*1
*2
1 3
for more information.
LED labels
GA500,
GA700,
1000-Series GA800,
CR700, and
CH700
1 1
3 Receiving
Installation
Manual
1
11