Set The Default Gateway - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
F131 B<N><SP>SM<SP>nnn.nnn.nnn.nnn
where:
F = ASCII character F
131 = unit function number
<SP> = space
B = ASCII letter to denote Option Bay number follows
<N> = Option Bay Number, 1 through 4.
SM = specify Subnet Mask command
nnn.nnn.nnn.nnn = dotted decimal address
For example, enter:
F131 B4 SM 255.255.255.0
Response (one of the following lines):
OK - The Subnet Mask has been received and applied by the PTP Option Card<CR><LF>

Set the Default Gateway

To get the Default Gateway, enter:
F131 B<N> G
To set the Default Gateway, enter:
F131 B<N><SP>G<SP>nnn.nnn.nnn.nnn
where:
F = ASCII character F
131 = unit function number
<SP> = space
B = ASCII letter to denote Option Bay number follows
<N> = Option Bay Number, 1 through 4.
G = specify Default Gateway command
nnn.nnn.nnn.nnn = dotted decimal address
For example, enter:
F131 B4 G 206.54.47.1
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S S S S S S S S S S S S S S S S S S S
2
1
5
S S S S
127