Symmetricom XLi IEEE 1588 User Manual page 161

S S S S S S S S S
ntpInPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of NTP packets delivered to the NTP application
layer from the transport layer."
::= { ntp 1 }
ntpOutPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of NTP packets passed from the NTP application
layer to the transport layer."
::= { ntp 2 }
ntpInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of NTP packets reject for any reason by NTP
application layer."
::= { ntp 3 }
ntpAuthFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Total number of authentication failures.
ntpInErrors."
::= { ntp 4 }
ntpDesiredAcc OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The desired (worst case time) accuracy in microseconds that the
time server will attempt to steer to.
ntpEstError.
NTP alarm condition will be set (ntpSysLeap will be equal to 3).
Note: outgoing NTP packets will have their leap indicator field set to
ntpSysLeap."
::= { ntp 5 }
ntpEstErr OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-only
STATUS deprecated
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S
Should ntpEstError be greater than ntpDesiredAcc, the
S S S S S S S S S
This is a subset of
This variable is related to
S S S S S S S S S
2
1
5
S S S S
153