Symmetricom XLi IEEE 1588 User Manual page 162

Symmetricom xli ieee 1588 clock user guide
Table of Contents

Advertisement

S
S
S
S
S
S
S
S
S
DESCRIPTION
"The deprecated estimated (time) error in microseconds of the time
server.
This variable is related to ntpEstError.
is small and constant for a given type of time server.
primary synchronization is lost, this value will slowly increase with
time as the time server's oscillator flywheels away from true time.
Should ntpEstError be greater than ntpDesiredAcc, the NTP alarm
condition will be set (ntpSysLeap will be equal to 3).
Note: a primary time server's outgoing NTP packets will have its leap
indicator field set to ntpSysLeap."
::= { ntp 6 }
ntpSysLeap OBJECT-TYPE
SYNTAX INTEGER (0..3)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is a status code indicating normal operation, a leap second to
be inserted in the last minute of the deprecated day, a leap second to be
deleted in the last second of the day or an alarm condition indicating
the loss of timing synchronization.
outgoing NTP packet will have its leap indicator field set to
ntpSysLeap."
::= { ntp 7 }
ntpSysHostMode OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The value of this variable indicates the mode that the host is
operating in.
NTP packet mode field."
::= { ntp 8 }
ntpSysStratum OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is an integer that ranges from 1 to 255 indicating the stratum
level of the local clock. Note: a primary time server sets outgoing NTP
packets stratum field and ntpSysStratum to 1."
::= { ntp 9 }
ntpSysPoll OBJECT-TYPE
SYNTAX INTEGER (6..10)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"When the time server is in NTP broadcast mode, this is an integer
indicating the maximum interval between successive NTP messages, in
seconds to the nearest power of two.
2^6 or 64 seconds. Note: a primary time server's outgoing NTP packet
154
S
S
S
S
S
S
S
S
S
Note: this is the value of the time server's outgoing
S
S
S
S
S
S
S
S
S
Usually, this value
Note: a primary time server's
For example a value of 6 means
S
S
S
S
S
S
S
S
S
However, when
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S
S
S
S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xli ieee 1588 clock

Table of Contents