F100 L/Lock/Unlock - Remote Lockout - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
selecting between 10 Base-T and Auto. If you have questions about your unit, contact
Customer Assistance (page
To display the current Base-T setting, enter:
F100<S>BASET<CR>
where
= ASCII character F
F
= unit function number
100
= Space
<S>
BASET = specify Base-T command
= input line terminator
<CR>
The XLi responds:
F100 BASET 10T<CR><LF>
To set the Ethernet port to automatically negotiate the maximum connection speed, enter:
F100<SP>BASET<SP>AUTO
To set the Ethernet port's connection speed to 10Base-T, enter:
F100<SP>BASET<SP>10
XLi responds:
OK <CR><LF>
RESETING THE UNIT<CR><LF>
PLEASE WAIT...<CR><LF>
F100 L/LOCK/UNLOCK – Remote Lockout
Use function F100 LOCK or UNLOCK to enable/disable remote access to the command line interface
through the network port. Use function F100 L to display the status of Remote Lockout. Remote Lockout
can also be set using F100 on the keypad/display interface. The factory setting is "Unlocked". To unlock
remote lockout, use the keypad/display or the serial port's command line interface (The network port is
not available because it has been locked).
Warning:
F100 L and F100 LOCK terminates any active network sessions and prevents future
network sessions. To unlock F100 L or F100 LOCK, use the serial port command line
interface or the keypad display.
To lock the unit from a remote location, enter:
F100 LOCK<CR>
86
S S S S S S S S S
197).
S S S S S S S S S S S S S S S S S S
H: Sales and
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S