Symmetricom XLi IEEE 1588 User Manual page 45

S S S S S S S S S
F100 K I L L – Reboot
F100 P – Change User Password
F100 PI – PING
F100 PN – Change User Name
F108 – Oscillator Configuration
F110 – J1 Input (TIET)
F111 – J2 Output (Rate)
F113 – J3 Input Configuration (Aux
Ref)
F116 – Display Brightness Level
F117 – Factory Configuration
F118 – Option Board Configuration
F119 – GPS Receiver Configuration
F120 - N.1 Frequency Synthesizer
F123 – Have Quick Input/1 PPS Sync
Configuration
F126 – Options Key Entry
F128 - Have Quick Output
a.The web interface makes it convenient to edit the SNMP configuration files directly in the browser. Symmetricom
recommends this approach versus the more complicated approach of transferring configuration files to an FTP server.
Please note that the functions marked "Not Supported" are associated with options that are unavailable for
the XLi IEEE 1588 clock. While those functions remain in the user interfaces, many references to them have
been removed from this manual to avoid confusion. For additional information on these functions, consult the
User Guide for the standard XLi Time and Frequency System, available from the XLi Product Information
CD-ROM and from http://www.symmetricom.com/media/pdf/manuals/man-xli.pdf.
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S
N,S
N,S,W
N,S
N,S,W
K,N,S,W View the oscillator type
K,N,S,W Configure the J1 input connector. IRIG Time Code not
K,N,S,W Configure the J2 output connector. PPO not supported.
K,N,S,W Configure the J3 input connector. Freq Meas not
K
K,N,S,W View some of the factory settings such as the serial
K,N,S,W View the contents of each option bay. Only recognizes
K,N,S,W Configure and display status for GPS Receivers
K,N,S,W Not supported.
K,N,S,W Not supported.
K,N,S
K,N,S,W Not supported.
S S S S S S S S S
Reboot the XLi
Change the XLi password
Ping from the XLi to another host on the network
Change the User Name
supported.
supported.
Set the brightness of the display on the XLi's front panel
number
certain cards
Enable an XLi option by entering a software key
S S S S S S S S S
2
1
5
S S S S
37