F100 L - Remote Lockout - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
where:
= ASCII character F
F
= unit function number
100
= space
<S>
LOCK = specify LOCK command
<CR> = input line terminator
For example, enter:
F100 LOCK<CR>
To users on the serial port, XLi responds:
OK<CR><LF>
Or, to users on the network port, XLi gives the following response and then closes the port:
GOODBYE.<CR><LF>
To unlock remote lockout, use the command line interface on the serial port to enter:
F100 UNLOCK<CR>
Or use the keypad/display's F100.
F100 L – Remote Lockout
Command Line Only – Not available in display.
Use function F100 L to display the status of the remote lock. For more information, see F100 LOCK
above.
To view the lock setting for remote access, enter:
F100 L<CR>
where:
= ASCII character F
F
= unit function number
100
= space
<S>
= specify L command
L
<CR> = input line terminator
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S S S S S S S S S S S S S S S S S S S
2
1
5
S S S S
87