Symmetricom XLi IEEE 1588 User Manual page 167

S S S S S S S S S
::= { acts 2 }
actsFailRedial OBJECT-TYPE
SYNTAX INTEGER (0..9999)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"When the dial-up session fails to connect this is the time in
seconds to wait to try again."
::= { acts 3 }
actsMaxCallPeriod OBJECT-TYPE
SYNTAX INTEGER (0..999)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is the maximum time in minutes the ACTS unit will wait between
successful calls to the ACTS service.
::= { acts 4 }
actsPhoneNum OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..25))
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This is the phone number of the ACTS dial-up service, including
any prefixes needed to reach an outside line or international dialing.
Prefixes are separated by a comma from the main phone number."
::= { acts 5 }
actsNumberOfCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times the time server has called the ACTS dial-up
service - weather the call was successful or not."
::= { acts 6 }
actsGoodCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times the time server called the ACTS dial-up service
and successfully received the time."
::= { acts 7 }
actsBadCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of times the time server called the ACTS dial-up service
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S S S S S S S S S S
"
S S S S S S S S S
2
1
5
S S S S
159