Symmetricom XLi IEEE 1588 User Manual page 171

S S S S S S S S S
"This is a status code indicating: 1- normal operation, 2- a leap
second to be inserted in the last minute of the current day, 3- a leap
second to be deleted in the last second of the day, or 4- an alarm
condition indicating the loss of timing synchronization.
primary time server's outgoing NTP packet will have its leap indicator
field set to ntpSysLeap."
::= { ntp 7 }
ntpSysHostMode OBJECT-TYPE
SYNTAX INTEGER
{
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this variable indicates the mode the unit is
operating in.
NTP packet mode field."
::= { ntp 8 }
ntpSysStratum OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This integer (1..255) indicates the stratum level of the local
clock. Note: A primary time server sets outgoing NTP packets stratum
field, ntpSysStratum, to 1."
::= { ntp 9 }
ntpSysPoll OBJECT-TYPE
SYNTAX INTEGER (6..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the time server is in NTP broadcast mode, this integer
indicates the maximum interval between successive NTP messages, in
seconds, to the nearest power of two.
2^6 or 64 seconds. Note: a primary time server's outgoing NTP packet
will have its poll field set to ntpSysPoll.
to 0 when not in NTP broadcast mode.
server initiated NTP packet, the value of the poll equals the value set
in the incoming packet."
::= { ntp 10 }
ntpSysPrecision OBJECT-TYPE
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S
hostModeIsReserved0
hostModeIsSymmetricActive
hostModeIsSymmetricPassive (3),
hostModeIsClient
hostModeIsServer
hostModeIsBroadcast
hostModeIsReserved6
hostModeIsReserved7
Note: this is the value of the time server's outgoing
S S S S S S S S S
(1),
(2),
(4),
(5),
(6),
(7),
(8)
For example a value of 6 means
Note: This field is equal
Note: Unless this is a time
S S S S S S S S S
Note: a
2
1
5
S S S S S
163