Status Display; Menu Display - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
Time Display related functions:
• Select between the 12 or 24 hour format displayed:
Time related functions:
• "F1 – Time Zone Offset" on page 38
• "F3 – Time & Date" on page 40
• "F66 – Daylight Saving Time (DST) Mode" on page 63

Status Display

The Status Display comes up automatically when the XLi is rebooted. To manually switch from another
display to the Status Display, press STATUS button on the keypad. The keypad appears as follows:
∗ GPS PRI
LOCKED
UTC 200:21:24:09 2002
where:
LOCKED = System Clock Status is Locked or Unlocked to the current reference source. See Clock
* = A reference source input has been configured, but is not available. ( Note: When using
GPS PRI = Shows the reference source type (The function that controls each one is noted below):
UTC = Time display mode: GPS, UTC, TAI, Standard, or Local (
200:21:24:09 2002 = The time, in DDD:HH:MM:SS YYYY format (

Menu Display

To use the XLi functions that are available from the keypad, press the MENU button on the keypad.
"Function Summary" on page 35
26
S S S S S S S S
"F73 – Alarm Control / Status" on page 69
Status in
GPS, "*" may remain visible for up to 13 minutes) See
Configuration" on page 110
• GPS PRI, GPS SEC (
• PTP PRI, PTP SEC (
page 119
)
The "IRIG" and "AUX REF" reference sources are also possible, but not supported.
Automatic switching between the reference sources listed above is controlled by
Clock Source Control" on page 77
page 65
)
lists which functions are available from the Menu Display.
S S S S S S S S S
"F2 – 12/24 Hour Format" on page
"F119 – GPS Receiver Configuration" on page 110
"F131 - Precision Time Protocol Network Config" on
.
See "Time Display" on page 25.
S S S S S S S S S
"F119 – GPS Receiver
"F69 – Time Mode" on
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S
39.
)
"F74 –
)