Xli System Group - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
This MIB structure also provides a useful definition for the system object ID. SNMP managers may use
the system object ID to identify the class of object being accessed. With this structure, the system object
ID is defined as Truetime.products.xli for the XLi product and Truetime.products.xxx for all subsequent
products.

XLi System Group

The XLI system group contains the xliFault and the xliStatus groups. These groups contain information
describing the operation of the XLI system as a whole. The xliFault group contains information
concerning system faults that have occurred, as well as configuration parameters for the generation of
system alarms, called traps in SNMP, resulting from those faults. The xliStatus provides two different
views of the operational system. The first is a general view specifying if the clock is operational. The
second is a detailed view containing the current status of each system component. The xliFault and
xliStatus groups are described below.
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S S S S S S S S S S S S S S S S S S S S
2
1
5
S S S S
179