F100 Pi - Ping - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
where:
= ASCII character F
F
= unit function number
100
= space
<S>
= specify Password command
P
<CR> = input line terminator
The XLi responds:
ENTER NEW USER PASSWORD:
When you enter the new password, the XLi responds:
CONFIRM NEW USER PASSWORD:
Enter the same new password again, to confirm the spelling. If the same new password has been
entered twice, The XLi responds:
OK<CR><LF>
In this case, the new password will be used for the next login. However, if the new password is entered
differently the second time, The XLi responds:
ERROR: PASSWORDS DO NOT MATCH. NEW PASSWORD REJECTED.
F100 PI – PING
Use function F100 PI to ping a remote host to see if it is reachable. If no IP Address is provided, F100 PI
uses the XLi's own IP Address, and tests whether the XLi's network port has a good network connection.
To ping a known host, enter:
F100 PI<S><IP Address><CR>
For example:
F100 PI 206.254.000.021<CR>
The unit responds (example):
PING 206.254.000.021: REMOTE HOST FOUND.<CR><LF>
or
PING 206.254.000.021 : REMOTE HOST NOT FOUND.<CR><LF>
96
S S S S S S S S S S S S S S S S S S S S S S S S S S S
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S