F18 - Software Version Request; F27 - Ftm Iii Configuration; F42 - Multicode Output Configuration; F44 - N.8 Frequency Synthesizer - Symmetricom XLi IEEE 1588 User Manual

S S S S S S S S S
F18 – Software Version Request
Use function F18 to display the current firmware version numbers of the firmware in the XLi:
• Bootloader
• Software (firmware)
• File System
• Project Rev #
• FPGA
Command Line
Use Command Line Function F18 to obtain the system's firmware version information.For example,
enter:
F18<CR>
The XLi responds:
F18 BOOTLOADER
SOFTWARE
FILE SYSTEM 192-8002v1.80
PROJ REV #
FPGA #
F27 – FTM III Configuration
Note: The FTM III card is currently unavailable as an option for the standard XLi IEEE 1588 clock.
F42 – Multicode Output Configuration
Note: The Multicode card is currently unavailable as an option for the standard XLi IEEE 1588 clock.
F44 – N.8 Frequency Synthesizer
Note: The N.8 card is currently unavailable as an option for the standard XLi IEEE 1588 clock.
F50 – GPS Receiver LLA/XYZ Position
Use function F50 to display the current GPS position. Specifically, Use function F50 to:
XLi IEEE 1588 Clock
997-01510-03, Rev. C, 12/12/2006
S S S S S S S S
192-8000
192-8001
1.80
184-8000V50
S S S S S S S S S S S S S S S S S S
2
1
5
S S S S S
53