SIS Overview
Using the Command and Response Tables
Command and Response Tables for SIS Commands
The
switcher recognizes as valid, the responses that are returned to the host, a description of the command function
or the results of executing the command, and examples of commands in ASCII.
ASCII to Hex Conversion Table
Space
Figure 33.
ASCII to Hexadecimal Character Conversion Table
Symbol Definitions
Symbol definitions, including all X variables, can be found on the pages containing the SIS commands to which
they apply. Symbols applying to all SIS commands are described below.
•
= Space
]
= Carriage return with line feed
}
= Carriage return with no line feed
|
= Pipe (can be used interchangeably with the
E
= Escape
W
= Can be used interchangeably with the E character
NOTES:
•
Upper- and lowercase text can be used interchangeably unless otherwise stated.
•
If the unit does not support or recognize an entered command, it ignores the command and nothing
happens.
The
table
on the next page shows the resolutions and refresh rates of the available EDIDs for the
DTP2 CrossPoint 82 Series.
DTP2 CrossPoint 82 Scaling Presentation Matrix Switchers • SIS Configuration and Control
starting on page 51 lists the commands that the
•
}
character)
49