Auerswald COMpact 5200 Instruction Manual page 38

Important Information
External S Port for ISDN Network Provider
0
Connection type
Range
Terminators
External Analogue Port for Analogue Network Provider
Range
Type of dialling
Reception amplification
Transmission amplification
Ringer signal frequency
CLIP detection
Call end detection
Impedances
Ethernet Port for Internet and VoIP Terminals as well as PC and Printer
Interface
VoIP standard
VoIP codecs, internal/external
Terminals
USB Host for Storage Medium
Interface
Storage medium
38
S basis access as Point-to-Multipoint connection or as a
0
Point-to-Point connection, EURO-ISDN (DSS1), unit is
powered locally
With typical telephone or network cable (twisted-pair)
Max. 150 m for Point-to-Multipoint connection
Max. 1000 m for PTP connection
100 Ohm, switchable; factory settings on
Ca. 800 m at 0.6 mm diameter
Tone dialling
Configurable: -12 to +12 dB
Configurable: -6 to +6 dB
Configurable: 16 / 25 / 50 Hz
Configurable: V.23-FSK / DTMF
Configurable: DTMF code D, line polarity reversal, loop
current detection
270R + (750R || 150 nF)
10/100 Base-T (10/100 Mbit/s, RJ-45 twisted-pair)
SIP according to RFC 3261
G.711 (default), G.726, iLBC
More than 1 terminal per internal VoIP channel
(overcommitment)
USB (high speed, V2.0)
Not included, 1 GB or more recommended
COMpact 5200/5200R/5500R - Instructions V03 03/2019