Auerswald COMpact 5200 Instruction Manual page 57

If the terminals and the PBX have a short distance
to each other, connect a single COMfortel 1200/
1400/1600/2600 system telephone directly to the
RJ-45 socket of the internal U
ISDN terminals or two system telephones per port
you require a U /S
P0 0
If the distance between PBX and terminal is greater,
lay the lines fixed at the terminal clamps of the
internal U port.
P0
Caution: Terminals integrated in the wall
sockets are destroyed and can damage the device.
• Contrary to the S
already integrated in the terminals (COMfortel 1200/1400/1600/2600 or U
Adapter).
• Remove terminals which have already been integrated in the wall sockets for use at
the U port.
P0
Note: You do not need an ISDN wall socket if you use a U
Adapter can be mounted on the wall or it can be connected to the PBX via the two
screw terminals on the back.
COMpact 5200/5200R/5500R - Instructions V03 03/2019
port. For all other
P0
Adapter.
port, do not equip a line at the U
0
internal U port
P0
IAE/UAE8
port with terminals. These are
P0
/S Adapter. The U
P0 0
Installation
/S
P0 0
/S
P0 0
57