PLANET ECLIPSE GEO2 Operator's Manual page 34

Preset
tHe Preset menu
in order to simplify the set up of the Geo2 a number of
preset configurations are available for selection. Choosing
one of these presets will cause all of the necessary
parameters to be set in such a way as to make the Geo2
comply with the rules governing a particular paintball
league
preset configurations of their own.
load
tHe load Preset Parameter
This parameter is used to load the required
preset configuration and has the following
choices:
> user 1: load a set of custom firing mode
parameters that have been previously saved
by the user.
> user 2: load a set of custom firing mode
parameters that have been previously saved
by the user.
> factorY: reset every parameter to the factory set
default. The Geo2 leaves the factory set in this way.
34.
. it is also possible for the user to save up to two
1
> nPPl: load a set of parameters that configures the
Geo2 to comply with the 2008 NPPl rules governing firing
modes.
1,2
> PsP 10: load a set of parameters that configures the
Geo2 to comply with the PSP rules governing firing modes
in lower divisions (10bps).
1,2
> PsP 12: load a set of parameters that configures the
Geo2 to comply with the PSP rules governing firing modes
in higher divisions (12bps).
1,2
> ms10: load a set of parameters that configures the Geo2
to comply with the 2010 Millennium Series rules governing
firing modes.
1,2
> cancel: Editing is cancelled and the parameter remains
unchanged.
saVe
tHe saVe Preset Parameter
This parameter is used to save the current
set of parameters as a user defined custom
preset configuration.
This parameter has the following choices:
> user 1: Save the current parameters as
the preset ' ' .
user 1
> user 2: Save the current parameters as the preset '
' .
2
> cancel: Editing is cancelled and the parameter remains
unchanged.
Some presets and fire modes may only be available in certain
1
countries and on some models of the Geo2.
All presets are correct at time of printing. It is the users
2
responsibility to ensure that the loaded preset complies with the
event rules the marker is intended to be used in.
user