PLANET ECLIPSE GEO2 Operator's Manual page 32

accessinG tHe menu
sYstem
To access the Main menu from the run screen double-click
the button and the first item on the Main menu will be
displayed. Alternatively, push and hold the
2 seconds.
Some of the parameters in the menu system can have a
tournament lock applied to them. This lock can be toggled
on and off by pressing to tournament lock button on the
circuit board ( see A in fig 8.1).
if you try to select a parameter that is locked, the locked
display will show on the screen.
moVinG around tHe
menus
Press and release the
the menu. when the last menu item is displayed, pressing
the
Press and release the
item on the menu. when the first menu item is displayed,
pressing the
when the displayed item is a branch, as indicated by an
animation on the right of the screen, press the
to move to another menu.
32.
button to display the next item on
button will display the first item.
button to display the previous
button will display the last item.
alterinG Parameters
WarninG: tHe marKer can be fired WHile
naViGatinG all menus and Parameters.
button for
when the displayed item is a parameter, as
indicated by a parameter value on the right
of the screen, pressing the
activate the
parameter value to be altered. when
mode is active, the black box surrounding
the text disappears. There are two types of
parameter, numeric parameters and choice
parameters.
A numeric parameter has a numeric value
whereas a choice parameter is one that has
a small number of distinct choices. Altering
parameter values is essentially the same for both types of
parameter.
a
To alter a numeric parameter, first activate the
Press the
step at a time. Press and hold the
the parameter value rapidly. when the value reaches it's
maximum it will revert to it's minimum value. Press the
fiG 8.1
button to decrease the parameter value one step at a time.
Press and hold the
value rapidly. when the value reaches it's minimum it will
revert to it's maximum value. when the required parameter
value is displayed press the
and end the
To alter a choice parameter, first activate the
Press the
when the last choice is displayed, pressing
the first choice in the list. Press the
the previous choice in the list. when the first choice is
displayed, pressing the
choice in the list. when the required choice is displayed
button
press the
mode. if the displayed choice is cancel then pressing the
button will end the
to the value that is was prior to editing.
button will
mode which allows the
EDIT
EDIT
button to increase the parameter value one
button to increase
button to decrease the parameter
button to accept the value
mode.
EDIT
button to display the next choice in the list.
button to display
button will display the last
button to accept the choice and end the
mode and restore the parameter
EDIT
mode.
EDIT
mode.
EDIT
will display
EDIT