PLANET ECLIPSE GEO2 Operator's Manual page 2

adHere strictlY to tHese and all otHer
01. Please read and understand all
instruction manuals before use.
The Eclipse Geo2 is not a toy. Paintball safetY
02.
rules must be folloWed at all times.
Careless or improper use, including failure to follow
03.
instructions and warnings within this User Manual and
attached to the Geo2 could cause death or serious
injury.
Do not remove or deface any warnings attached to
04.
the Geo2.
05. Paintball industry standard eye/face/ear and head
protection designed specifically to stop paintballs and
meeting ASTM standard F1776 (USA) or CE standard
(Europe) must be worn by user and any person
within range. Proper protection must be worn during
assembly, cleaning and maintenance.
Never shoot at a person who is not wearing proper
06.
protection.
Never look directly into the barrel of the marker.
07.
Accidental discharge into the eyes may cause
permanent injury or death. Never look into the
barrel or breech area of the Geo2 whilst the marker is
switched on and able to fire.
Keep the Geo2 switched off until ready to shoot.
08.
09. Treat every marker as if it is loaded and ready to fire.
The electronic on/off is the markers safety, always
10.
switch off the marker when not in use.
2.
safetY instructions and Guidelines!
11. Always fit a barrel-blocking device to the Geo2 when
not in use.
Always remove all paintballs from the Geo2 when not
12.
in use on the field of play.
Never point the Geo2 at anything you do not intend
13.
to shoot.
14. Do not shoot at persons at close range.
15. Do not field strip or remove any parts while the
marker is pressurised.
16. Do not pressurise the Geo2 without the bolt system
correctly installed, as high-pressure gas will be
emitted.
17. Do not fire the Geo2 without the bolt system correctly
installed.
18.
Never put your finger or any foreign objects into the
paintball feed tube of the Geo2.
19.
Never allow pressurised gas to come into contact with
any part of your body.
20.
Always remove the first stage regulator and relieve
all residual gas pressure from the Geo2 before
disassembly.
21.
Always remove the first stage regulator and relieve all
residual gas pressure from the Geo2 for transport and
storage.
22.
Always follow guidelines given with your first stage
regulator for safe transportation and storage.