Product Specifications - Eaton 93PM Installation And Operation Manual

Product Specifications

1 1 0 0 . . 2 2 . . 1 1 U U P P S S I I n n p p u u t t
Operating Input Voltage
Operating Input Frequency Range
Operating Input Current
Input Current Harmonic Content
Power Factor
Line Surges
Battery Voltage
Battery Charging Capacity
1 1 0 0 . . 2 2 . . 2 2 U U P P S S O O u u t t p p u u t t
UPS Output Capacity
Output Voltage Regulation
Output Voltage
Output Voltage Harmonic Content
Output Current
Output Voltage Balance
Output Voltage Phase Displacement
Frequency Regulation
Synchronous to Bypass
Frequency Slew Rate
136 Eaton 93PM UPS (400V/480V Four-Wire – 100 kW Frame) Installation and Operation Manual 164000566—Rev 04
Rectifier: 400 Vac Wye, 3W + ground. Neutral not used.
Bypass: 400 Vac Wye, 4W + ground.
or
Rectifier: 480 Vac Wye, 3W + ground. Neutral not used.
Bypass: 480 Vac Wye, 4W + ground.
50/60 Hz
For 380 Vac UPS systems, see Table 5
For 400 Vac UPS systems, see Table 8
For 415 Vac UPS systems, see Table 11
For 480 Vac UPS systems, see Table 14
Reduced for Generator
Adjustable
3% THD at full load
Minimum 0.99
6 kV OC, 3 kA SC per ANSI 62.41 and IEC 801 4
240 cell – 480Vdc
16.5 A maximum per 50 kW module at full load at nominal input voltage
100% rated current
± 1% (10% to 100% load)
400 Vac Wye, 4W + ground
or
480 Vac Wye, 4W + ground
1.5% maximum THD (linear load)
5% maximum THD (nonlinear load)
For 380 Vac UPS systems, see Table 5
For 400 Vac UPS systems, see Table 8
For 415 Vac UPS systems, see Table 11
For 480 Vac UPS systems, see Table 14
< 2% for 100% maximum load imbalance (linear load)
< 2.5° for 100% maximum load imbalance (linear load)
0.1 Hz free running
± 4 Hz (default setting)
1 Hz per second (default setting)
through Table 7.
through Table 10.
through Table 13.
and Table 15.
through Table 7.
through Table 10.
through Table 13.
and Table 15.