Product Specifications - Eaton BladeUPS Installation And Operation Manual

Chapter 7

Product Specifications

The following tables detail the model characteristics such as input, output, and environmental specifications
for the Eaton BladeUPS Maintenance Bypass Cabinet (MBC). The MBC is a free-standing cabinet with safety
shields behind the doors.
Table 7-1. Model Characteristics
kVA rating
Fault Current
Nominal Current
Size and Weight
Safety Standards
Table 7-2. Input Ratings
Operating Input Voltage
(Nominal +10/–15%)
Operating Input Frequency Range
Table 7-3. Output Ratings
Operating Output Voltage
(Nominal +10/–15%)
Operating Output Frequency Range
Table 7-4. Distribution Characteristics
Panelboards
Bussing
Breakers
Table 7-5. Transformer Characteristics
Energy Efficiency
Frequency
K Factor
Bussing
Eaton BladeUPS 12 kVA Maintenance Bypass Cabinet Installation and Operation Manual P-164000130—Rev 1
60 kVA
35 kAIC @ 480 Vac
50 kAIC @ 240 Vac
225A
W x D x H: 762 mm x 914.4 mm x 2032 mm (30 in x 36 in x 80 in)
Weight: 544.310 kg (1200 lb)
UL 1778
CSA C22.2 no. 107.1
480V
Three-phase, three wire plus ground
60 Hz (±5 Hz)
280V/120V
Three-phase, three wire plus ground
60 Hz (±5 Hz)
(2) Cutler-Hammer 42-pole 225A panelboards
NOTE This is the base Configuration. See A4 in Appendix A, "Installation Reference
Appendices" for additional configurations.
Silver-plated
225A Cutler-Hammer Series C molded case breakers for UOB, RIB, and MBB
125A Cutler-Hammer Series C molded case breakers for SIB
TP-1 rated
60 Hz
K1
Silver-plated
www.eaton.com/powerquality 7-1