Installation - Pepperl+Fuchs IC-KP-B7-V95 Manual

IC-KP-B7-V95

Installation

5 Installation
5.1 Storage and transport
For storage and transport purposes, package the unit using shockproof
packaging material and protect it against moisture. The best method of protection
is to package the unit using the original packaging. Furthermore, ensure that the
ambient conditions are within allowable range.
5.2 Unpacking
Check the product for damage while unpacking. In the event of damage to the
product, inform the post office or parcel service and notify the supplier.
Check the package contents with your purchase order and the shipping
documents for:
■
■
■
■
Retain the original packaging in case you have to store or ship the device again at
a later date.
Should you have any questions, please contact Pepperl+Fuchs.
5.3 EMC concept
The outstanding noise immunity of the IDENTControl against emission and
immission is based on its consistent shielding design, which uses the principle of
the Faraday cage. Interference is caught in the shield and safely diverted via the
ground connections.
Read head
The cable shielding is used to discharge electromagnetic interference. When
shielding a cable, you must connect both sides of the shield to ground with low
resistance and low inductance.
Delivery quantity
Device type and version in accordance with the type plate
Accessories
Quick start guide
IDENTControl
DeviceNet
Control
15