Product Description - Pepperl+Fuchs IC-KP-B7-V95 Manual

IC-KP-B7-V95

Product Description

4 Product Description
4.1 Range of application
The system is suited for the following applications:
4.2 Device characteristics
4.3 Product family
The IDENTControl brand name represents a complete identification system. The
system consists of an IDENTControl interface including bus interface, inductive
R/W heads (125 kHz and 13.56 MHz) and accompanying code and data carriers
in many different designs. The IDENTControl can be connected to other
identification systems.
The system is equally well suited for use in the switching cabinet and for field use
in IP67. The interface to the controlling fieldbus is integrated into the enclosure
and all connections are implemented as plugs. This enables simple installation
and quick, correct replacement in case of device failure. The consistent EMC
design (metal enclosure, grounding, shielded wires) offers a high degree of noise
immunity. Function buttons are available for parameterization and entering
commands directly into the IDENTControl.
4.3.1 R/W heads
There are different R/W heads available for the IDENTControl in different designs.
You can connect inductive R/W heads (125 kHz and 13.56 MHz) depending on
your particular application.
4.3.2 Code / Data carrier
Read only / read/write tag 125 kHz (inductive)
A wide range of read only and read/write tag designs are available for this
frequency range, from a 3 mm thin glass tube to a transponder 50 mm in diameter.
Read/write tags are available for temperatures up to 300 °C (max. 5 min) in
chemical-resistant housings for installation in metal and in degree of protection
IP68/IP69K. IPC02-... read only tags offer 40-bit read only codes. IPC03-...
read/write tags have a 928-bit freely programmable memory bank and an
unmodifiable 32-bit read only code. You can define 40-bit read only codes with
IPC11-... read only tags. You can use these as permanent read only codes or
continually redefine them.
10
Automation
■
Material flow control in production
■
Acquisition of operating data
■
Access control
■
Identification of storage vessels, pallets, work piece carriers, refuse
■
containers, tanks, containers, etc.
Up to 4 R/W heads can be connected
■
Alternatively up to 2 R/W heads and 2 trigger sensors can be connected
■
LCD indicator with background illumination
■
Direct operation using 4 function keys
■
LED status indicator for bus communication and R/W heads
■